Epson LX-300II Reference Guide - Page 83
part of one is printed at the top of the next - parts
View all Epson LX-300II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Printed characters are not what you expected The typestyles or characters you sent with your software did not print. Cause What to do The software may not be properly configured. Check that the software is correctly configured for your printer. The font selected on the control panel does not print. Cause What to do Your software may be overriding your control panel setting. Check the font setting in your application software. The print position is not what you expected Printing starts too high or too low on the page, or the bottom part of one page is printed at the top of the next page. Cause What to do Your application software settings may be incorrect. Check the margin or top-of-form position setting in your application software. Page length does not match the length of the paper. Cause What to do The page length setting in your application may be incorrect. Check the page length set by your application software and adjust it if necessary. Maintenance and Troubleshooting 83