Epson LX-300II Reference Guide - Page 32
Envelopes, humidity conditions. - test print
View all Epson LX-300II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
❏ To remove the labels from the printer, tear off the fresh supply at the back of the printer; then press the LF/FF button to advance the remaining labels out of the printer. c Caution: Never feed labels backward through the printer; they can easily peel off the backing sheet and jam the printer. Envelopes You can feed envelopes individually using the paper guide. Keep the following tips in mind: ❏ Set the paper thickness lever to the proper position. See page 29. ❏ To load an envelope, follow the steps on page 26 for printing a single sheet. Insert the wide edge of the envelope into the printer first, printable-side down. When you insert the envelope between the edge guides, push it firmly and hold it until it feeds into the printer. ❏ Use envelopes only under normal temperature and humidity conditions. ❏ Make sure the printing stays entirely within the printable area. ❏ The print head must not go past the left or right edge of the envelope or other thick paper. It's a good idea to print a test page using a normal single sheet of paper before you print on envelopes. 32 Paper Handling