Epson PictureMate Flash - PM 280 Basics - Page 55
Removing the Battery
View all Epson PictureMate Flash - PM 280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
The power light flashes during charging when PictureMate is off. It takes about 2 hours to fully charge the battery when PictureMate is off. It takes longer when you use PictureMate while it is charging. The power light turns off when the battery is fully charged (if PictureMate is turned off). The following battery status icons appear in the upper right corner of the photo viewer screen: Charging Full 2/3 full 1/3 full Low Almost out Battery status icon Note: If you are running PictureMate with the battery, the printer turns off automatically after 15 minutes if it is not being used (unless PictureMate is connected to a computer and a memory card is inserted). Press the On button to turn it back on. Removing the Battery If there is a problem with your battery, or you want to replace it with one that is already charged, you need to remove the battery. 1 Make sure PictureMate is turned off. 2 Release the latch and remove the battery. 3 Replace the battery cover. 54