HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 100
reset qos car name
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Usage guidelines An aggregate CAR action takes effect only after it is applied to an interface or referenced in a QoS policy. Examples # Configure the aggregate CAR action aggcar-1, where CIR is 25600, CBS is 512000, and red packets are dropped. system-view [Sysname] qos car aggcar-1 aggregative cir 25600 cbs 512000 red discard Related commands display qos car name reset qos car name Use reset qos car name to clear the statistics about the specified aggregate CAR action. Syntax reset qos car name [ car-name ] Views User view Predefined user roles network-admin Parameters car-name: Specifies the name of an aggregate CAR action. This argument must start with a letter, and is a case-sensitive string of 1 to 31 characters. If no car-name is specified, the statistics about all the aggregate CAR actions is cleared. Examples # Clear the statistics about the aggregate CAR action aggcar-1. reset qos car name aggcar-1 95