HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 105
display buffer
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Examples # Enable the Burst function. system-view [Sysname] burst-mode enable display buffer Use display buffer to display buffer configuration. Syntax display buffer [ slot slot-number ] [ queue [ queue-id ] ] Views Any view Predefined user roles network-admin network-operator Parameters slot slot-number: Specifies a member device by its number in an IRF fabric. Without this option, the command applies to all member devices. queue queue-id: Specifies a queue by its number in the range of 0 to 7. If no queue is specified, the command displays configuration information for all queues. Usage guidelines Without the queue keyword, this command displays the buffer configuration made by the buffer total-shared command. With the queue keyword, this command displays the buffer configuration made by both the buffer queue guaranteed and buffer queue shared commands. Examples # Display buffer configuration. display buffer Slot Type Eg(Total-shared) 1 cell 25 Specify the slot num Total-shared: Size of the shared buffer for all ports Unit: Ratio display buffer queue Slot Queue Type Eg(Guaranteed , Shared) 2 0 cell 20 , 33 2 1 cell 13 , 35 2 2-7 cell 13 , 33 Specify the slot num Guaranteed: Size of the minimum guaranteed buffer per queue Shared: Size of the maximum shared buffer per queue Unit: Ratio 100