HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 62
Syntax, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Syntax display qos policy global [ slot slot-number ] [ inbound | outbound ] Views Any view Predefined user roles network-admin network-operator Parameters inbound: Displays information about the inbound global QoS policy. An inbound global QoS policy applies to the incoming traffic globally. outbound: Displays information about the outbound global QoS policy. An outbound global QoS policy applies to the outgoing traffic globally. slot slot-number: Specifies an IRF member device. The slot-number argument is the member device ID in the IRF fabric. Usage guidelines If no direction is specified, this command displays information about both inbound and outbound global QoS policies. If no slot number is specified, this command displays the global QoS policies of the IRF fabric. Examples # Display information about the inbound global QoS policy. display qos policy global inbound Direction: Inbound Policy: 1 Classifier: 1 Operator: AND Rule(s) : If-match acl 2000 Behavior: 1 Marking: Remark dscp 3 Committed Access Rate: CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes) Green action: pass Yellow action: pass Red action: discard Green packets: 0(Packets) Red packets: 0(Packets) Classifier: 2 Operator: AND Rule(s) : If-match protocol ipv6 Behavior: 2 Accounting enable: 0 (Packets) 57