HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 88
qos wfq { byte-count | weight }, Related commands, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
[Sysname-Ten-GigabitEthernet1/1/5] qos wfq byte-count Related commands display qos wfq interface qos wfq { byte-count | weight } Use qos wfq { byte-count | weight } to assign a queue to a WFQ group with a certain scheduling weight. Use undo qos wfq to restore the default. Syntax qos wfq queue-id group { 1 | 2 } { byte-count | weight } schedule-value undo qos wfq queue-id Default When WFQ queuing is used on an interface, all the queues are in WFQ group 1 and have a weight of 1. Views Ethernet interface view Predefined user roles network-admin Parameters queue-id: Specifies a queue by its ID in the range of 0 to 7. group { 1 | 2 }: Specifies WFQ group 1 or 2. byte-count: Allocates bandwidth to queues in terms of bytes. weight: Allocates bandwidth to queues in terms of packets. schedule-value: Specifies a scheduling weight for the specified queue in WFQ queuing, in the range of 1 to 15. Usage guidelines You must use the qos wfq command to enable WFQ first before you configure this command. The queue-id argument can be either a number or a keyword. Table 32 shows the number-keyword map. Examples # Enable byte-count WFQ on interface Ten-GigabitEthernet 1/1/5, assign queue 0, with the scheduling weight 10, to WFQ group 1, and assign queue 1, with the scheduling weight 5, to WFQ group 2. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos wfq byte-count [Sysname-Ten-GigabitEthernet1/1/5] qos wfq 0 group 1 byte-count 10 [Sysname-Ten-GigabitEthernet1/1/5] qos wfq 0 group 2 byte-count 5 Related commands • display qos wfq interface • qos bandwidth queue 83