HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 75
Default, Views, Predefined user roles, Parameters, Examples, Related commands
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Default The switch does not trust the priority carried in packets. Views Ethernet interface view Predefined user roles network-admin Parameters dot1p: Uses the 802.1p priority in incoming packets for priority mapping. dscp: Uses the DSCP value in incoming packets for priority mapping. Examples # Set the trusted packet priority type to 802.1p priority on Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos trust dot1p Related commands display qos trust interface 70
70
Default
The switch does not trust the priority carried in packets.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
dot1p
: Uses the 802.1p priority in incoming packets for priority mapping.
dscp
: Uses the DSCP value in incoming packets for priority mapping.
Examples
# Set the trusted packet priority type to 802.1p priority on Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] qos trust dot1p
Related commands
display qos trust interface