HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 81
WRR commands, display qos wrr interface
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
undo qos sp Default An interface uses the WRR queuing algorithm. Views Ethernet interface view Predefined user roles network-admin Examples # Enable SP queuing on Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos sp Related commands display qos sp interface WRR commands display qos wrr interface Use display qos wrr interface to display the WRR queuing configuration on an interface. Syntax display qos wrr interface [ interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays the WRR queuing configuration of all the interfaces. Examples # Display the WRR queuing configuration of Ten-GigabitEthernet 1/1/5. display qos wrr interface ten-gigabitethernet 1/1/5 Interface: Ten-GigabitEthernet1/1/5 Output queue: Weighted Round Robin queuing Queue ID Group Weight be sp NA af1 1 2 af2 1 3 76