HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 78
qos lr, Parameters, Examples, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Parameters interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays the rate limit configuration on all the interfaces. Examples # Display the rate limit configuration on all the interfaces. display qos lr interface Interface : Ten-GigabitEthernet1/1/5 Direction: Inbound CIR 102400 (kbps), CBS 5120000 (Bytes) Direction: Outbound CIR 204800 (kbps), CBS 10240000 (Bytes) Table 29 Command output Field Interface Direction CIR CBS Description Interface type and interface number. Direction in which the rate limit configuration is applied: inbound or outbound. CIR in kbps. CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic. qos lr Use qos lr to limit the rate of packets on the interface. Use undo qos lr to remove the rate limit. Syntax qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ] undo qos lr { inbound | outbound } Default Rate limit is not configured on an interface. Views Ethernet interface view Predefined user roles network-admin Parameters inbound: Limits the rate of incoming packets on the interface. outbound: Limits the rate of outgoing packets on the interface. cir committed-information-rate: Specifies the CIR in kbps. The value range for the committed-information-rate argument is integral multiples of 8 between 8 and 10485760 for 10-GE interfaces, integral multiples of 8 between 8 and 20971520 for 20-GE interfaces, and integral multiples of 8 between 8 and 41943040 for 40-GE interfaces. 73