HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 63
display qos policy interface, Table 22, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Filter enable: Permit Marking: Remark dot1p 1 Table 22 Command output Field Direction Green packets Red packets Description Direction (inbound or outbound ) in which the QoS policy is applied. Statistics about green packets. Statistics about red packets. For the output description, see Table 16 and Table 18. display qos policy interface Use display qos policy interface to display information about the QoS policies applied to an interface or all interfaces. Syntax display qos policy interface [ interface-type interface-number ] [ inbound | outbound ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Specifies an interface by its type and number to display information about the QoS policies applied to it. inbound: Displays information about the QoS policy applied to the incoming traffic of the specified interface. outbound: Displays information about the QoS policy applied to the outgoing traffic of the specified interface. Usage guidelines If no direction is specified, the command displays information about the QoS policy applied to the incoming traffic and the QoS policy applied to the outgoing traffic. Examples # Display information about the QoS policy applied to the incoming traffic of Ten-GigabitEthernet 1/1/5. display qos policy interface ten-gigabitethernet 1/1/5 inbound Interface: Ten-GigabitEthernet1/1/5 Direction: Inbound 58