HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 74

Priority trust mode commands, display qos trust interface, qos trust

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

Related commands display qos trust interface Priority trust mode commands display qos trust interface Use display qos trust interface to display priority trust mode and port priority information on an interface. Syntax display qos trust interface [ interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays priority trust mode and port priority information of all interfaces. Examples # Display the priority trust mode and port priority information of Ten-GigabitEthernet 1/1/5. display qos trust interface Ten-GigabitEthernet 1/1/5 Interface: Ten-GigabitEthernet1/1/5 Port priority information Port priority: 0 Port priority trust type: none Table 27 Command output Field Interface Port priority Port priority trust type Description Interface type and interface number. Port priority set for the interface. Priority trust mode on the interface: dot1p, dscp, or none. If the trust mode is none, the port priority is used for priority mapping. qos trust Use qos trust to configure the priority trust mode for an interface. Use undo qos trust to restore the default priority trust mode. Syntax qos trust { dot1p | dscp } undo qos trust 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
69
Related commands
display qos trust interface
Priority trust mode commands
display qos trust interface
Use
display qos trust interface
to display priority trust mode and port priority information on an interface.
Syntax
display qos trust
interface
[
interface-type interface-number
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
: Specifies an interface by its type and number. If no interface is specified,
this command displays priority trust mode and port priority information of all interfaces.
Examples
# Display the priority trust mode and port priority information of Ten-GigabitEthernet 1/1/5.
<Sysname> display qos trust interface Ten-GigabitEthernet 1/1/5
Interface: Ten-GigabitEthernet1/1/5
Port priority information
Port priority: 0
Port priority trust type: none
Table 27
Command output
Field
Description
Interface
Interface type and interface number.
Port priority
Port priority set for the interface.
Port priority trust type
Priority trust mode on the interface:
dot1p
,
dscp
, or
none
. If the trust mode is
none
, the port priority is used for priority mapping.
qos trust
Use
qos trust
to configure the priority trust mode for an interface.
Use
undo qos trust
to restore the default priority trust mode.
Syntax
qos trust
{
dot1p
|
dscp
}
undo qos trust