HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 92

qos wred apply, qos wred table

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

qos wred apply Use qos wred apply to apply a WRED table on an interface. Use undo qos wred apply to restore the default. Syntax qos wred apply [ table-name ] undo qos wred apply Default No WRED table is applied to an interface, and the tail drop mode is used on an interface. Views Ethernet interface view Predefined user roles network-admin Parameters table-name: Specifies the name of a WRED table. Usage guidelines If no WRED table name is specified, this command applies the default WRED table to the interface. Examples # Apply the queue-based WRED table table1 to interface Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos wred apply table1 Related commands • display qos wred interface • display qos wred table • qos wred table qos wred table Use qos wred table to create a WRED table and enter WRED table view. Use undo qos wred table to delete a WRED table. Syntax qos wred queue table table-name undo qos wred queue table table-name Default No WRED table exists on the switch. Views System view 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
87
qos wred apply
Use
qos wred apply
to apply a WRED table on an interface.
Use
undo qos wred apply
to restore the default.
Syntax
qos wred apply
[
table-name
]
undo qos wred apply
Default
No WRED table is applied to an interface, and the tail drop mode is used on an interface.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
table-name
: Specifies the name of a WRED table.
Usage guidelines
If no WRED table name is specified, this command applies the default WRED table to the interface.
Examples
# Apply the queue-based WRED table
table1
to interface Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] qos wred apply table1
Related commands
•
display qos wred interface
•
display qos wred table
•
qos wred table
qos wred table
Use
qos wred table
to create a WRED table and enter WRED table view.
Use
undo
qos wred table
to delete a WRED table.
Syntax
qos wred
queue
table
table-name
undo qos wred queue table
table-name
Default
No WRED table exists on the switch.
Views
System view