HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 66
qos apply policy (interface view, control plane view), Apply QoS policy
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Remark dot1p 1 Classifier: 3 Operator: AND Rule(s) : -noneBehavior: 3 -none- Table 24 Command output Field Direction Green packets Red packets Description Direction in which the QoS policy is applied for the VLAN. Statistics about green packets. Statistics about red packets. For the output description, see Table 16 and Table 18. qos apply policy (interface view, control plane view) Use qos apply policy to apply a QoS policy. Use undo qos apply policy to remove the QoS policy. Syntax qos apply policy policy-name { inbound | outbound } undo qos apply policy policy-name { inbound | outbound } Default No QoS policy is applied to an interface or control plane. Views Interface view, control plane view Predefined user roles network-admin Parameters policy-name: Specifies a QoS policy name, a case-sensitive string of 1 to 31 characters. inbound: Applies the QoS policy to the incoming traffic of an interface or control plane. outbound: Applies the QoS policy to the outgoing traffic of an interface. This keyword is not supported in control plane view. Examples # Apply QoS policy USER1 to the incoming traffic of Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos apply policy USER1 outbound # Apply QoS policy aaa to the incoming traffic of the control plane of IRF member device 3. system-view [Sysname] control-plane slot 3 61