HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 73
Port priority commands, qos priority
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Syntax qos map-table { dot1p-dp | dot1p-lp | dscp-dot1p| dscp-dp | dscp-dscp } Views System view Predefined user roles network-admin Parameters For the description of keywords, see Table 25. Examples # Enter the 802.1p-drop priority map view. system-view [Sysname] qos map-table dot1p-dp [Sysname-maptbl-dot1p-dp] Related commands • display qos map-table • import Port priority commands qos priority Use qos priority to change the port priority of an interface. Use undo qos priority to restore the default. Syntax qos priority priority-value undo qos priority Default The port priority is 0. Views Ethernet interface view Predefined user roles network-admin Parameters priority-value: Specifies the port priority value in the range of 0 to 7. Examples # Set the port priority of interface Ten-GigabitEthernet 1/1/5 to 2. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos priority 2 68