HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 84
qos wrr group sp, Examples, Related commands, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Table 32 The number-keyword map for the queue-id argument Number 0 1 2 3 4 5 6 7 Keyword be af1 af2 af3 af4 ef cs6 cs7 Examples # Enable byte-count WRR queuing on Ten-GigabitEthernet 1/1/5, assign queue 0, with the scheduling weight 10, to WRR group 1, and assign queue 1, with the scheduling weight 5, to WRR group 2. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr byte-count [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 0 group 1 byte-count 10 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 1 group 2 byte-count 5 Related commands • display qos wrr interface • qos wrr qos wrr group sp Use qos wrr group sp to assign a queue to the SP group. Use undo qos wrr group sp to restore the default. Syntax qos wrr queue-id group sp undo qos wrr queue-id Default An interface uses the byte-count WRR queuing algorithm, and all the queues are in WRR group 1. Views Ethernet interface view Predefined user roles network-admin Parameters queue-id: Specifies a queue by its ID in the range of 0 to 7. sp: Assigns a queue to the SP group, which uses the SP queue scheduling algorithm. 79