HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 103

system-view [Sysname] interface ten-gigabitethernet 1/1/6 [Sysname-Ten-GigabitEthernet1/1/6] dot1x port-control unauthorized-force Related commands display dot1x dot1x port-method Use dot1x port-method to specify an access control method for the port. Use undo dot1x port-method to restore the default. Syntax dot1x port-method { macbased | portbased } undo dot1x port-method Default MAC-based access control applies. Views Ethernet interface view Predefined user roles network-admin Parameters macbased: Uses MAC-based access control on the port to separately authenticate each user attempting to access the network. Using this method, when an authenticated user logs off, no other online users are affected. portbased: Uses port-based access control on the port. Using this method, once an 802.1X user passes authentication on the port, any subsequent user can access the network through the port without authentication. When the authenticated user logs off, all other users are logged off. Examples # Configure Ten-GigabitEthernet 1/1/6 to implement port-based access control. system-view [Sysname] interface ten-gigabitethernet 1/1/6 [Sysname-Ten-GigabitEthernet1/1/6] dot1x port-method portbased Related commands display dot1x dot1x quiet-period Use dot1x quiet-period to enable the quiet timer. Use undo dot1x quiet-period to disable the timer. Syntax dot1x quiet-period 94