HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 117
Port security commands, display port-security
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Port security commands display port-security Use display port-security to display port security configuration, operation information, and statistics for one or more ports. Syntax display port-security [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Specifies a port by its type and number. Usage guidelines If no port is specified, this command displays port security information for all ports. Examples # Display port security information for all ports. display port-security Port security is enabled globally AutoLearn aging time is 1 minutes Disableport Timeout: 20s OUI value: Index is 1, OUI value is 000d1a Index is 2, OUI value is 003c12 Ten-GigabitEthernet1/1/6 is link-down Port mode: userLoginWithOUI NeedToKnow mode: NeedToKnowOnly Intrusion protection mode: DisablePort Max number of secure MAC addresses: 50 Current number of secure MAC addresses: 0 Authorization is ignored Ten-GigabitEthernet1/1/7 is link-down Port mode: noRestriction NeedToKnow mode: disabled Intrusion protection mode: NoAction Max number of secure MAC addresses: Not configured Current number of secure MAC addresses: 0 108