HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 205
source, interface, identity-key, svkey, dh-group14, aes128, sha1-96, zlib.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
source: Specifies a source IP address or source interface to connect to the server. By default, the device automatically selects the source IP address from the routing table. To avoid the communication failure between the client and the server due to interface faults, use the specified loopback interface as the source interface, and either IP address of the two interfaces as the source IP address. interface interface-type interface-number: Specifies a source interface by its type and number. The IPv6 address of this interface is the source IP address to send packets. ipv6 ipv6-address: Specifies a source IPv6 address. Usage guidelines When the server adopts publickey authentication to authenticate a client, the client must get the local private key for digital signature. Because publickey authentication uses either RSA or DSA algorithm, you must specify a public key algorithm (by using the identity-key keyword) in order to get the correct data for the local private key. Examples # Establish a connection to the IPv6 Stelnet server 2000::1 and specify the public key of the server as svkey. The SSH client uses publickey authentication. Use the following algorithms: • Preferred key exchange algorithm: dh-group14. • Preferred server-to-client encryption algorithm: aes128. • Preferred client-to-server HMAC algorithm: sha1. • Preferred server-to-client HMAC algorithm: sha1-96. • Preferred compression algorithm between the server and client: zlib. ssh2 ipv6 2000::1 prefer-kex dh-group14 prefer-stoc-cipher aes128 prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib publickey svkey 196