HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 286
IKE commands, authentication-algorithm, authentication-method
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
IKE commands IKE commands are supported only when the switch is operating in FIPS mode. For more information about FIPS mode, see Security Configuration Guide. authentication-algorithm Use authentication-algorithm to specify an authentication algorithm for an IKE proposal. Use undo authentication-algorithm to restore the default. Syntax In non-FIPS mode: authentication-algorithm { md5 | sha } undo authentication-algorithm In FIPS mode: authentication-algorithm sha undo authentication-algorithm Default The IKE proposal uses the authentication algorithm of HMAC-SHA1. Views IKE proposal view Predefined user roles network-admin Parameters md5: Specifies HMAC-MD5 as the authentication algorithm. sha: Specifies HMAC-SHA1 as the authentication algorithm. Examples # Specify HMAC-SHA1 as the authentication algorithm for IKE proposal 1. system-view [Sysname] ike proposal 1 [Sysname-ike-proposal-1] authentication-algorithm sha Related commands display ike proposal authentication-method Use authentication-method to specify an authentication method to be used in an IKE proposal. Use undo authentication-method to restore the default. 277