HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 113
mac-authentication timer, Views, Predefined user roles, Parameters, Examples, Related commands, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Views Ethernet interface view Predefined user roles network-admin Parameters user-number: Sets the maximum number of concurrent MAC authentication users on the port. The value range is 1 to 256. Examples # Configure port Ten-GigabitEthernet 1/1/6 to support up to 32 concurrent MAC authentication users. system-view [Sysname] interface ten-gigabitethernet 1/1/6 [Sysname-Ten-GigabitEthernet1/1/6] mac-authentication max-user 32 Related commands display mac-authentication mac-authentication timer Use mac-authentication timer to set the MAC authentication timers. Use undo mac-authentication timer to restore the defaults. Syntax mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value | server-timeout server-timeout-value } undo mac-authentication timer { offline-detect | quiet | server-timeout } Default The offline detect timer is 300 seconds, the quiet timer is 60 seconds, and the server timeout timer is 100 seconds. Views System view Predefined user roles network-admin Parameters offline-detect offline-detect-value: Sets the offline detect timer in the range of 60 to 65535, in seconds. quiet quiet-value: Sets the quiet timer in the range of 1 to 3600, in seconds. server-timeout server-timeout-value: Sets the server timeout timer in the range of 100 to 300, in seconds. Usage guidelines MAC authentication uses the following timers: • Offline detect timer-Sets the interval that the device waits for traffic from a user before it regards the user idle. If a user connection has been idle within the interval, the device logs the user out and stops accounting for the user. 104