HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 62

Number of users 100 to 499 500 to 999 1000 or more Real-time accounting interval 6 minutes 12 minutes 15 minutes or longer Examples # Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] timer realtime-accounting 51 Related commands retry realtime-accounting timer response-timeout (RADIUS scheme view) Use timer response-timeout to set the RADIUS server response timeout timer. Use undo timer response-timeout to restore the default. Syntax timer response-timeout seconds undo timer response-timeout Default The RADIUS server response timeout period is 3 seconds. Views RADIUS scheme view Predefined user roles network-admin Parameters seconds: Specifies the RADIUS server response timeout period, in the range of 1 to 10 seconds. Usage guidelines If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request, it resends the request so that the user has more opportunity to obtain the RADIUS service. The NAS uses the RADIUS server response timeout timer to control the transmission interval. The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response timeout period cannot be greater than 300 seconds. Examples # Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] timer response-timeout 5 53