HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 216
arp source-suppression limit, Default, Views, Predefined user role, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
undo arp source-suppression enable Default ARP source suppression function is disabled. Views System view Predefined user role network-admin Usage guidelines Configure this feature on the gateway devices. Examples # Enable the ARP source suppression function. system-view [Sysname] arp source-suppression enable Related commands display arp source-suppression arp source-suppression limit Use arp source-suppression limit to set the maximum number of unresolvable packets that can be received from a device in 5 seconds. Use undo arp source-suppression limit to restore the default. Syntax arp source-suppression limit limit-value undo arp source-suppression limit Default The maximum number is 10. Views System view Predefined user roles network-admin Parameters limit-value: Sets the maximum number of unresolvable packets that can be processed in 5 seconds. It is in the range of 2 to 1024. Usage guidelines If the number of unresolvable packets from a host within 5 seconds exceeds the specified threshold, the device stops processing packets from that host until the 5 seconds elapse. Examples # Set the maximum number of unresolvable packets that can be received from a device in 5 seconds to 100. 207