HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 313
reset ike sa, Display the current IKE SAs.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
Predefined user roles network-admin Parameters proposal-number&: Specifies up to six IKE proposal numbers, each in the range of 1 to 65535. An IKE proposal specified earlier has a higher priority. Usage guidelines When acting as the initiator, the device sends the specified IKE proposals to its peer for IKE negotiation. When acting as the responder, the device uses the IKE proposals configured in system view to match the IKE proposals received from the initiator. Examples # Specify IKE proposal 10 for IKE profile prof1. system-view [Sysname] ike profile prof1 [Sysname-ike-profile-prof1] proposal 10 Related commands ike proposal reset ike sa Use reset ike sa to delete IKE SAs. Syntax reset ike sa [ connection-id connection-id ] Views User view Predefined user roles network-admin Parameters connection-id connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range 1 to 2000000000. Usage guidelines When you delete an IKE SA, the device automatically sends a notification to the peer. Examples # Display the current IKE SAs. display ike sa Total IKE SAs: 2 Connection-ID Remote Flag DOI 1 202.38.0.2 RD|ST IPSEC 2 202.38.0.3 RD|ST IPSEC Flags: RD--READY ST--STAYALIVE RL--REPLACED FD-FADING TO-TIMEOUT 304