HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 239
Parameters, Usage guidelines, Examples, If you specify an IPsec policy name and a sequence number
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
network-operator Parameters ipv6-policy: Displays information about IPv6 IPsec policies. policy: Displays information about IPv4 IPsec policies. policy-name: Specifies an IPsec policy by its name, a case-sensitive string of 1 to 63 characters. seq-number: Specifies an IPsec policy entry by its sequence number. The value range is 1 to 65535. Usage guidelines • If you do not specify any parameters, this command displays information about all IPsec policies. • If you specify an IPsec policy name and a sequence number, this command displays information about the specified IPsec policy entry. If you specify an IPsec policy name without any sequence number, this command displays information about all IPsec policy entries with the specified name. Examples # Display information about all IPv4 IPsec policies. display ipsec policy IPsec Policy: mypolicy Interface: Vlan-interface 1 Sequence number: 10 Mode: manual Security data flow: 3101 Remote address: 192.168.0.64 Transform set: tran1 Inbound AH setting: AH SPI: AH string-key: AH authentication hex key: Inbound ESP setting: ESP SPI: 54321 (0x0000d431) ESP string-key: ****** ESP encryption hex key: ESP authentication hex key: Outbound AH setting: AH SPI: AH string-key: AH authentication hex key: Outbound ESP setting: ESP SPI: 12345 (0x00003039) 230