HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 249
display ipsec statistics
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Field sour addr dest addr port protocol SPI Transform set SA duration (kilobytes/sec) SA remaining duration (kilobytes/sec) Max received sequence-number Description Source IP address of the data flow. Destination IP address, Port number. Protocol type. SPI of the IPsec SA. Security protocol and algorithms used by the IPsec transform set. IPsec SA lifetime, in kilobytes or seconds. Remaining IPsec SA lifetime, in kilobytes or seconds. Max sequence number in the received packets. Max sent sequence-number Max sequence number in the sent packets. Anti-replay check enable Whether any-replay checking is enabled. UDP encapsulation used for NAT traversal Whether NAT traversal is used by the IPsec SA. Status IPsec SA stateful failover status: active or backup. No duration limit for this SA The manual IPsec SAs do not have lifetime. Related commands • ipsec sa global-duration • reset ipsec sa display ipsec statistics Use display ipsec statistics to display IPsec packet statistics. Syntax display ipsec statistics [ tunnel-id tunnel-id ] Views Any view Predefined user roles network-admin network-operator Parameters tunnel-id tunnel-id: Specifies an IPsec tunnel by its ID. The value range is 0 to 4294967295. You can use the display ipsec tunnel brief command to view the IDs of established IPsec tunnels. Usage guidelines If you do not specify any parameters, this command displays statistics for all IPsec packets. 240