HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 58
state primary
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Use undo security-policy-server to remove a security policy server. Syntax security-policy-server { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] undo security-policy-server { { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] | all } Default No security policy server is specified. Views RADIUS scheme view Predefined user roles network-admin Parameters ipv4-address: Specifies the IPv4 address of the security policy server. ipv6 ipv6-address: Specifies the IPv6 address of the security policy server. vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the security policy server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the security policy server is on the public network, do not specify this option. all: Specifies all security policy servers. Usage guidelines You can specify up to eight security policy servers for a RADIUS scheme. Examples # Specify the security policy server 10.110.1.2 for RADIUS scheme radius1. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] security-policy-server 10.110.1.2 Related commands display radius scheme state primary Use state primary to set the status of a primary RADIUS server. Syntax state primary { accounting | authentication } { active | block } Default The primary RADIUS server specified for a RADIUS scheme is in active state. Views RADIUS scheme view Predefined user roles network-admin 49