HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 63
user-name-format (RADIUS scheme view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Related commands • display radius scheme • retry user-name-format (RADIUS scheme view) Use user-name-format to specify the format of the username to be sent to a RADIUS server. Use undo user-name-format to restore the default. Syntax user-name-format { keep-original | with-domain | without-domain } undo user-name-format Default The ISP domain name is included in the username. Views RADIUS scheme view Predefined user roles network-admin Parameters keep-original: Sends the username to the RADIUS server as it is entered. with-domain: Includes the ISP domain name in the username sent to the RADIUS server. without-domain: Excludes the ISP domain name from the username sent to the RADIUS server. Usage guidelines A username is typically in the format userid@isp-name, of which isp-name is used by the device to determine the ISP domain to which a user belongs. Some earlier RADIUS servers, however, cannot recognize a username containing an ISP domain name. Before sending a username including a domain name to such a RADIUS server, the device must remove the domain name. This command allows you to specify whether to include a domain name in a username sent to a RADIUS server. If a RADIUS scheme defines that the username is sent without the ISP domain name, do not apply the RADIUS scheme to more than one ISP domain. The RADIUS server regards two users in different ISP domains but with the same userid as one. Examples # Configure the device to remove the domain name from the username sent to the RADIUS servers specified in RADIUS scheme radius1. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] user-name-format without-domain Related commands display radius scheme 54