HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 174

Views System view Predefined user roles network-admin Parameters times: Specifies the maximum number of authentication attempts for SSH users, in the range of 1 to 5. Usage guidelines You can set this limit to prevent malicious hacking of usernames and passwords. This configuration takes effect only on the users at next login. If the authentication method of an SSH user is any, the total number of authentication attempts (including both publickey and password authentication attempts) must not exceed the upper limit configured by the ssh server authentication-retries command. Otherwise, the authentication fails. If the authentication method of an SSH user is password-publickey, the server first uses publickey authentication, and then uses password authentication to authenticate the SSH user. The process is considered one authentication attempt. Examples # Set the maximum number of authentication attempts for SSH users to 4. system-view [Sysname] ssh server authentication-retries 4 Related commands display ssh server ssh server authentication-timeout Use ssh server authentication-timeout to set the SSH user authentication timeout timer on the SSH server. Use undo ssh server authentication-timeout to restore the default. Syntax ssh server authentication-timeout time-out-value undo ssh server authentication-timeout Default The authentication timeout timer is 60 seconds. Views System view Predefined user roles network-admin Parameters time-out-value: Specifies an authentication timeout timer in the range of 1 to 120 seconds. 165