HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 305
local-identity
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
undo keychain keychain-name Default No IKE keychain is specified for an IKE profile. Views IKE profile view Predefined user roles network-admin Parameters keychain-name: Specifies an IKE keychain name, a case-insensitive string of 1 to 63 characters. Usage guidelines An IKE profile can reference up to six IKE keychains. An IKE keychain specified earlier has a higher priority. Examples # Specify IKE profile 1 for IKE keychain abc. system-view [Sysname] ike profile 1 [Sysname-ike-profile-1] keychain abc Related commands ike keychain local-identity Use local-identity to configure the local ID, the ID that the device uses to identify itself to the peer during IKE negotiation. Use undo local-identity to delete the local ID. Syntax local-identity { address { ipv4-address | ipv6 ipv6-address } | dn | fqdn [ fqdn-name ] | user-fqdn [ user-fqdn-name ] } undo local-identity Default No local ID is configured for an IKE profile, and an IKE profile uses the local ID configured in system view (using the ike identity command). If no local ID is configured in system view either, the IP address of the interface that the IPsec policy or IPsec policy template is applied to is used as the local ID. Views IKE profile view Predefined user roles network-admin Parameters address { ipv4-address | ipv6 ipv6-address }: Uses an IPv4 or IPv6 address as the local ID. 296