HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 60
timer quiet (RADIUS scheme view), Usage guidelines, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
port-number: Service port number of a secondary RADIUS server, a UDP port number in the range of 1 to 65535. The default port number of a secondary accounting server is 1813 and that of a secondary authentication is 1812. vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the secondary RADIUS server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. active: Specifies the active state, the normal operation state. block: Specifies the blocked state, the out-of-service state. Usage guidelines If no IP address is specified, this command changes the status of all configured secondary RADIUS servers. If the device finds that a secondary server in active state is unreachable, the device changes the status of the secondary server to blocked, starts a quiet timer for the server, and continues to try to communicate with the next secondary server in active state (a secondary RADIUS server configured earlier has a higher priority). When the quiet timer of a server times out, the status of the server automatically changes to active. If you set the status of the server to blocked before the quiet timer times out, the status of the server cannot change back to active unless you manually set the status to active. If all configured secondary servers are unreachable, the device considers the authentication or accounting attempt a failure. Examples # Set the status of all the secondary authentication servers in RADIUS scheme radius1 to blocked. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] state secondary authentication block Related commands • display radius scheme • state primary timer quiet (RADIUS scheme view) Use timer quiet to set the quiet timer for the servers specified in an RADIUS scheme. Use undo timer quiet to restore the default. Syntax timer quiet minutes undo timer quiet Default The server quiet period is 5 minutes. Views RADIUS scheme view Predefined user roles network-admin 51