HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 273
qos pre-classify, Default, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
undo protocol Default The IPsec transform set uses the ESP protocol. Views IPsec transform set view Predefined user roles network-admin Parameters ah: Specifies the AH protocol. ah-esp: Specifies using the ESP protocol first and then using the AH protocol. ah: Specifies the AH protocol. Usage guidelines The two tunnel ends must use the same security protocol in the IPsec transform set. Examples # Specify the AH protocol for the IPsec transform set. system-view [Sysname] ipsec transform-set tran1 [Sysname-ipsec-transform-set-tran1] protocol ah qos pre-classify Use qos pre-classify to enable the QoS pre-classify feature. Use undo qos pre-classify to restore the default. Syntax qos pre-classify undo qos pre-classify Default The QoS pre-classify feature is disabled. QoS uses the new IP header of IPsec packets to perform traffic classification. Views IPsec policy view, IPsec policy template view Predefined user roles network-admin Usage guidelines The QoS pre-classify feature enables QoS to classify packets by using the IP header of the original IP packets. Examples # Enable the QoS pre-classify feature. system-view 264