HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 311
priority (IKE keychain view), Create IKE keychain
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
For security purposes, all pre-shared keys, including those configured in plain text, are saved in cipher text to the configuration file. Examples # Create IKE keychain key1 and enter IKE keychain view. system-view [Sysname] ike keychain key1 # Set the pre-shared key to be used for IKE negotiation with peer 1.1.1.2 to 123456. [Sysname-ike-keychain-key1] pre-shared-key address 1.1.1.2 255.255.255.255 key simple 123456 Related commands • authentication-method • keychain priority (IKE keychain view) Use priority to specify a priority for an IKE keychain. Use undo priority to restore the default. Syntax priority number undo priority Default The priority of an IKE keychain is 100. Views IKE keychain view Predefined user roles network-admin Parameters priority number: Specifies a priority number in the range of 1 to 65535. The lower the priority number, the higher the priority. Usage guidelines To determine the priority of an IKE keychain, the device examines the existence of the match local address command before examining the priority number. An IKE keychain with the match local address command configured has a higher priority than an IKE keychain that does not have the match local address command configured. Examples # Set the priority to 10 for IKE keychain key1. system-view [Sysname] ike keychain key1 [Sysname-ike-keychain-key1] priority 10 302