HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 227
ARP automatic scanning and fixed ARP commands, arp fixup
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Views User view Predefined user roles network-admin Parameters interface interface-type interface-number: Clears the ARP detection statistics for the specified interface. Usage guidelines If you do not specify any interface, this command clears the statistics of all the interfaces. Examples # Clear the ARP detection statistics of all the interfaces. reset arp detection statistics ARP automatic scanning and fixed ARP commands arp fixup Use arp fixup to change the existing dynamic ARP entries into static ARP entries. You can use this command again to change the dynamic ARP entries learned later into static. Syntax arp fixup Views System view Predefined user roles network-admin Usage guidelines The static ARP entries changed from dynamic ARP entries have the same attributes as the manually configured static ARP entries. The number of static ARP entries changed from dynamic ARP entries is restricted by the number of static ARP entries that the device supports. As a result, the device may fail to change some dynamic ARP entries into static ARP entries. Suppose that the number of dynamic ARP entries is D and that of the existing static ARP entries is S. When the dynamic ARP entries are being changed into static, new dynamic ARP entries may be created (suppose the number is M) and some of the dynamic ARP entries may be aged out (suppose the number is N). After the change process is completed, the number of static ARP entries is D + S + M - N. To delete a specific static ARP entry changed from a dynamic one, use the undo arp ip-address [ vpn-instance-name ] command. To delete all such static ARP entries, use the reset arp all or reset arp static command. Examples # Enable fixed ARP. system-view 218