HP 6125XLG R2306-HP 6125XLG Blade Switch Security Command Reference - Page 251
display ipsec transform-set
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Field Invalid length Authentication failure Encapsulation failure Decapsulation failure Replayed packets ACL check failure MTU check failure Loopback limit exceeded Related commands reset ipsec statistics display ipsec transform-set Description Number of dropped packets due to invalid packet length. Number of dropped packets due to authentication failure. Number of dropped packets due to encapsulation failure. Number of dropped packets due to decapsulation failure. Number of dropped replayed packets. Number of dropped packets due to ACL check failure. Number of dropped packets due to MTU check failure. Number of dropped packets due to loopback limit exceeded. Use display ipsec transform-set to display information about IPsec transform sets. Syntax display ipsec transform-set [ transform-set-name ] Views Any view Predefined user roles network-admin network-operator Parameters transform-set-name: Specifies an IPsec transform set by its name, a case-sensitive string of 1 to 63 characters. Usage guidelines If you do not specify an IPsec transform set, this command displays information about all IPsec transform sets. Examples # Display information about all IPsec transform sets. display ipsec transform-set IPsec transform set: mytransform State: incomplete Encapsulation mode: tunnel Transform: ESP Table 37 Command output Field IPsec transform set Description Name of the IPsec transform set. 242