Home » HP Manuals » Servers » HP 6125XLG » Manual Viewer

HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Configuration Guide - Page 118

Displaying and maintaining MLD snooping, interface view and MLD-snooping view

Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

• You can enable the multicast group replacement function either for the current port in proper interface view or globally for all ports in MLD-snooping view. If the configurations are made in both interface view and MLD-snooping view, the configuration made in interface view takes priority. To enable the IPv6 multicast group replacement function globally: Step 1. Enter system view. 2. Enter MLD-snooping view. 3. Enable the IPv6 multicast group replacement function globally. Command system-view mld-snooping overflow-replace [ vlan vlan-list ] Remarks N/A N/A By default, the IPv6 multicast group replacement function is disabled. To enable the IPv6 multicast group replacement on a port: Step 1. Enter system view. 2. Enter Ethernet interface view or aggregate interface view. 3. Enable the IPv6 multicast group replacement function on the port. Command system-view interface interface-type interface-number mld-snooping overflow-replace [ vlan vlan-list ] Remarks N/A N/A By default, the IPv6 multicast group replacement function is disabled. Displaying and maintaining MLD snooping Execute display commands in any view and reset commands in user view. Task Command Display MLD snooping status. display mld-snooping [ global | vlan vlan-id ] Display information about dynamic MLD snooping forwarding entries. display mld-snooping group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ] [ slot slot-number ] Display information about static MLD display mld-snooping static-group [ ipv6-group-address | snooping forwarding entries. ipv6-source-address ] * [ vlan vlan-id ] [ verbose ] [ slot slot-number ] Display information about dynamic router ports. display mld-snooping router-port [ vlan vlan-id ] [ slot slot-number ] Display information about static router display mld-snooping static-router-port [ vlan vlan-id ] [ slot ports. slot-number ] Display statistics for the MLD messages learned by MLD snooping. display mld-snooping statistics Display information about Layer 2 IPv6 multicast forwarding entries. display ipv6 l2-multicast forwarding-table [ group ipv6-group-address | source ipv6-source-address ] * [ vlan vlan-id ] [ slot slot-number ] Display information about IPv6 MAC display ipv6 l2-multicast mac-forwarding-table [ mac-address ] [ vlan address multicast forwarding entries. vlan-id ] [ slot slot-number ] 111

Section	Page
Title Page	1
Contents	3
Multicast overview	8
Introduction to multicast	8
Information transmission techniques	8
Unicast	8
Broadcast	9
Multicast	9
Multicast features	10
Common notations in multicast	11
Multicast benefits and applications	11
Multicast benefits	11
Multicast applications	11
Multicast models	12
ASM model	12
SFM model	12
SSM model	12
Multicast architecture	12
Multicast addresses	13
IP multicast addresses	13
Ethernet multicast MAC addresses	15
Multicast protocols	16
Layer 3 multicast protocols	16
Layer 2 multicast protocols	17
Multicast packet forwarding mechanism	18
Configuring IGMP snooping	20
Overview	20
Basic IGMP snooping concepts	20
IGMP snooping related ports	20
Aging timers for dynamic ports in IGMP snooping	21
How IGMP snooping works	22
General query	22
IGMP report	22
Leave message	23
Protocols and standards	23
IGMP snooping configuration task list	24
Configuring basic IGMP snooping functions	24
Enabling IGMP snooping	24
Specifying the IGMP snooping version	25
Setting the maximum number of IGMP snooping forwarding entries	25
Configuring parameters for IGMP queries and responses	26
Configuring parameters for IGMP queries and responses globally	26
Configuring parameters for IGMP queries and responses in a VLAN	26
Configuring IGMP snooping port functions	27
Setting aging timers for dynamic ports	27
Setting the aging timers for dynamic ports globally	27
Setting the aging timers for the dynamic ports in a VLAN	27
Configuring static ports	28
Enabling IGMP snooping fast-leave processing	28
Configuring IGMP snooping policies	29
Configuring a multicast group filter	29
Configuring a multicast group filter globally	29
Configuring a multicast group filter on a port	30
Configuring multicast source port filtering	30
Configuring multicast source port filtering globally	30
Configuring multicast source port filtering on a port	30
Enabling dropping unknown multicast data	30
Setting the maximum number of multicast groups on a port	31
Enabling the multicast group replacement function	31
Displaying and maintaining IGMP snooping	32
IGMP snooping configuration examples	33
Group policy configuration example	33
Network requirements	33
Configuration procedure	33
Verifying the configuration	34
Static port configuration example	35
Network requirements	35
Configuration procedure	35
Verifying the configuration	37
Troubleshooting IGMP snooping	37
Layer 2 multicast forwarding cannot function	37
Symptom	37
Analysis	37
Solution	37
Multicast group filter does not work	38
Symptom	38
Analysis	38
Solution	38
Configuring multicast routing and forwarding	39
Overview	39
RPF check mechanism	39
RPF check process	39
RPF check implementation in multicast	40
Static multicast routes	41
Changing an RPF route	41
Creating an RPF route	42
Multicast forwarding across unicast subnets	43
Configuration task list	43
Enabling IP multicast routing	44
Configuring multicast routing and forwarding	44
Configuring static multicast routes	44
Configuring the RPF route selection rule	45
Configuring multicast load splitting	45
Configuring a multicast forwarding boundary	45
Configuring static multicast MAC address entries	45
Displaying and maintaining multicast routing and forwarding	46
Configuration examples	47
Changing an RPF route	47
Network requirements	47
Configuration procedure	48
Verifying the configuration	49
Creating an RPF route	49
Network requirements	49
Configuration procedure	50
Verifying the configuration	51
Multicast forwarding over a GRE tunnel	51
Network requirements	51
Configuration procedure	52
Verifying the configuration	53
Troubleshooting multicast routing and forwarding	54
Static multicast route failure	54
Symptom	54
Analysis	54
Solution	54
Multicast data fails to reach receivers	55
Symptom	55
Analysis	55
Solution	55
Configuring IGMP	56
Overview	56
IGMPv1 overview	56
IGMPv2 enhancements	58
Querier election mechanism	58
\	58
IGMPv3 enhancements	58
Enhancements in control capability of hosts	58
Enhancements in query and report capabilities	59
Protocols and standards	60
IGMP configuration task list	60
Configuring basic IGMP functions	60
Enabling IGMP	61
Specifying the IGMP version	61
Configuring an interface as a static member interface	61
Configuration guidelines	61
Configuration procedure	61
Configuring a multicast group filter	62
Adjusting IGMP performance	62
Enabling IGMP fast-leave processing	62
Displaying and maintaining IGMP	63
IGMP configuration examples	63
Network requirements	63
Configuration procedure	64
Verifying the configuration	65
Troubleshooting IGMP	65
No membership information on the receiver-side router	65
Symptom	65
Analysis	66
Solution	66
Inconsistent membership information on the routers on the same subnet	66
Symptom	66
Analysis	66
Solution	66
Configuring PIM	67
Overview	67
PIM-DM overview	67
Neighbor discovery	68
SPT building	68
Graft	69
Assert	69
PIM-SM overview	70
Neighbor discovery	70
DR election	70
RP discovery	71
RPT building	72
Multicast source registration	73
Switchover to SPT	74
Assert	74
Administrative scoping overview	75
Administrative scoping mechanism	75
Relationship between admin-scoped zones and the global-scoped zone	75
Protocols and standards	77
Configuring PIM-DM	77
PIM-DM configuration task list	77
Configuration prerequisites	77
Enabling PIM-DM	77
Enabling the state refresh feature	78
Configuring state refresh parameters	78
Configuring PIM-DM graft retry timer	79
Configuring PIM-SM	79
PIM-SM configuration task list	79
Configuration prerequisites	79
Enabling PIM-SM	80
Configuring an RP	80
Configuring a static RP	80
Configuring a C-RP	81
Configuring a BSR	81
Configuring a C-BSR	82
Configuring a PIM domain border	83
Disabling the BSM semantic fragmentation function	83
Configuring multicast source registration	84
Configuring switchover to SPT	84
Configuring common PIM features	85
Configuration task list	85
Configuration prerequisites	85
Configuring a multicast data filter	85
Configuring a hello message filter	85
Configuring PIM hello message options	86
Configuring hello message options globally	87
Configuring hello message options on an interface	87
Configuring common PIM timers	87
Configuring common PIM timers globally	88
Configuring common PIM timers on an interface	88
Setting the maximum size of each join or prune message	89
Enabling PIM to work with BFD	89
Displaying and maintaining PIM	89
PIM configuration examples	90
PIM-DM configuration example	90
Network requirements	90
Configuration procedure	91
Verifying the configuration	92
PIM-SM non-scoped zone configuration example	94
Network requirements	94
Configuration procedure	95
Verifying the configuration	96
PIM-SM admin-scoped zone configuration example	97
Network requirements	97
Configuration procedure	99
Verifying the configuration	100
Troubleshooting PIM	102
A multicast distribution tree cannot be correctly built	102
Symptom	102
Analysis	102
Solution	103
Multicast data is abnormally terminated on an intermediate router	103
Symptom	103
Analysis	103
Solution	104
An RP cannot join an SPT in PIM-SM	104
Symptom	104
Analysis	104
Solution	104
An RPT cannot be built or multicast source registration fails in PIM-SM	104
Symptom	104
Analysis	104
Solution	105
Configuring MLD snooping	106
Overview	106
Basic MLD snooping concepts	106
MLD snooping related ports	106
Aging timers for dynamic ports in MLD snooping	107
How MLD snooping works	108
General query	108
MLD report	108
Done message	109
Protocols and standards	109
MLD snooping configuration task list	110
Configuring basic MLD snooping functions	110
Enabling MLD snooping	110
Specifying the MLD snooping version	111
Setting the maximum number of MLD snooping forwarding entries	111
Configuring parameters for MLD queries and responses	112
Configuring parameters for MLD queries and responses globally	112
Configuring parameters for MLD queries and responses in a VLAN	112
Configuring MLD snooping port functions	112
Setting aging timers for dynamic ports	113
Setting the aging timers for dynamic ports globally	113
Setting the aging timers for the dynamic ports in a VLAN	113
Configuring static ports	113
Enabling MLD snooping fast-leave processing	114
Configuring MLD snooping policies	115
Configuring an IPv6 multicast group filter	115
Configuring an IPv6 multicast group filter globally	115
Configuring an IPv6 multicast group filter on a port	115
Configuring IPv6 multicast source port filtering	116
Configuring IPv6 multicast source port filtering globally	116
Configuring IPv6 multicast source port filtering on a port	116
Enabling dropping unknown IPv6 multicast data	116
Setting the maximum number of IPv6 multicast groups on a port	117
Enabling the IPv6 multicast group replacement function	117
Displaying and maintaining MLD snooping	118
MLD snooping configuration examples	119
IPv6 group policy configuration example	119
Network requirements	119
Configuration procedure	119
Verifying the configuration	120
Static port configuration example	121
Network requirements	121
Configuration procedure	121
Verifying the configuration	123
Troubleshooting MLD snooping	123
Layer 2 multicast forwarding cannot function	123
Symptom	123
Analysis	123
Solution	123
IPv6 multicast group filter does not work	124
Symptom	124
Analysis	124
Solution	124
Configuring IPv6 multicast routing and forwarding	125
Overview	125
RPF check mechanism	125
RPF check process	125
RPF check implementation in IPv6 multicast	125
IPv6 multicast forwarding across IPv6 unicast subnets	127
Configuration task list	127
Enabling IPv6 multicast routing	127
Configuring IPv6 multicast routing and forwarding	128
Configuring the RPF route selection rule	128
Configuring IPv6 multicast load splitting	128
Configuring an IPv6 multicast forwarding boundary	128
Configuring IPv6 static multicast MAC address entries	129
Displaying and maintaining IPv6 multicast routing and forwarding	130
IPv6 multicast routing and forwarding configuration example	130
Network requirements	131
Configuration procedure	131
Verifying the configuration	133
Troubleshooting	133
IPv6 multicast data fails to reach receivers	133
Symptom	133
Analysis	133
Solution	134
Configuring MLD	135
Overview	135
How MLDv1 works	135
Electing the MLD querier	135
Joining an IPv6 multicast group	136
Leaving an IPv6 multicast group	136
MLDv2 enhancements	137
Enhancements in control capability of hosts	137
Enhancement in MLD state	138
Protocols and standards	138
MLD configuration task list	138
Configuring basic MLD functions	138
Enabling MLD	138
Specifying the MLD version	139
Configuring an interface as a static member interface	139
Configuration guidelines	139
Configuration procedure	139
Configuring an IPv6 multicast group filter	140
Adjusting MLD performance	140
Enabling MLD fast-leave processing	140
Displaying and maintaining MLD	141
MLD configuration examples	141
Network requirements	141
Configuration procedure	142
Verifying the configuration	143
Troubleshooting MLD	143
No member information exists on the receiver-side router	143
Symptom	143
Analysis	144
Solution	144
Inconsistent membership information on the routers on the same subnet	144
Symptom	144
Analysis	144
Solution	144
Configuring IPv6 PIM	145
PIM overview	145
IPv6 PIM-DM overview	145
Neighbor discovery	146
SPT building	146
Graft	147
Assert	147
IPv6 PIM-SM overview	148
Neighbor discovery	148
DR election	148
RP discovery	149
Embedded RP	150
RPT building	151
IPv6 multicast source registration	151
Switchover to SPT	152
Assert	153
IPv6 administrative scoping overview	153
IPv6 administrative scoping mechanism	153
Relationship between IPv6 admin-scoped zones and the IPv6 global-scoped zone	154
Protocols and standards	155
Configuring IPv6 PIM-DM	155
IPv6 PIM-DM configuration task list	155
Configuration prerequisites	156
Enabling IPv6 PIM-DM	156
Enabling the state refresh feature	156
Configuring state refresh parameters	157
Configuring IPv6 PIM-DM graft retry timer	157
Configuring IPv6 PIM-SM	158
IPv6 PIM-SM configuration task list	158
Configuration prerequisites	158
Enabling IPv6 PIM-SM	158
Configuring an RP	159
Configuring a static RP	159
Configuring a C-RP	159
Configuring a BSR	160
Configuring a C-BSR	160
Configuring an IPv6 PIM domain border	161
Disabling the BSM semantic fragmentation function	162
Configuring IPv6 multicast source registration	162
Configuring switchover to SPT	163
Configuring common IPv6 PIM features	163
Configuration task list	163
Configuration prerequisites	164
Configuring an IPv6 multicast data filter	164
Configuring a hello message filter	164
Configuring IPv6 PIM hello message options	165
Configuring hello message options globally	165
Configuring hello message options on an interface	166
Configuring common IPv6 PIM timers	166
Configuring common IPv6 PIM timers globally	167
Configuring common IPv6 PIM timers on an interface	167
Setting the maximum size of each join or prune message	167
Enabling IPv6 PIM to work with BFD	168
Displaying and maintaining IPv6 PIM	168
IPv6 PIM configuration examples	169
IPv6 PIM-DM configuration example	169
Network requirements	169
Configuration procedure	170
Verifying the configuration	171
IPv6 PIM-SM non-scoped zone configuration example	172
Network requirements	172
Configuration procedure	174
Verifying the configuration	175
IPv6 PIM-SM admin-scoped zone configuration example	176
Network requirements	176
Configuration procedure	177
Verifying the configuration	179
Troubleshooting IPv6 PIM	181
A multicast distribution tree cannot be correctly built	181
Symptom	181
Analysis	181
Solution	182
IPv6 multicast data is abnormally terminated on an intermediate router	182
Symptom	182
Analysis	182
Solution	183
An RP cannot join an SPT in IPv6 PIM-SM	183
Symptom	183
Analysis	183
Solution	183
An RPT cannot be built or IPv6 multicast source registration fails in IPv6 PIM-SM	183
Symptom	183
Analysis	183
Solution	184
Support and other resources	185
Contacting HP	185
Subscription service	185
Related information	185
Documents	185
Websites	185
Conventions	186
Command conventions	186
GUI conventions	186
Symbols	186
Network topology icons	187
Port numbering in examples	187

Match case Limit results 1 per page

111

•

You can enable the multicast group replacement function either for the current port in proper

interface view or globally for all ports in MLD-snooping view. If the configurations are made in both

interface view and MLD-snooping view, the configuration made in interface view takes priority.

To enable the IPv6 multicast group replacement function globally:

Step

Command

Remarks

Enter system view.

system-view

N/A

Enter MLD-snooping view.

mld-snooping

N/A

Enable the IPv6 multicast

group replacement function

globally.

overflow-replace

[

vlan

vlan-list

]

By default, the IPv6 multicast group

replacement function is disabled.

To enable the IPv6 multicast group replacement on a port:

Step

Command

Remarks

Enter system view.

system-view

N/A

Enter Ethernet interface view

or aggregate interface view.

interface

interface-type

interface-number

N/A

Enable the IPv6 multicast

group replacement function

on the port.

mld-snooping overflow-replace

[

vlan

vlan-list

]

By default, the IPv6 multicast group

replacement function is disabled.

Displaying and maintaining MLD snooping

Execute

display

commands in any view and

reset

commands in user view.

Task

Command

Display MLD snooping status.

display

mld-snooping

[

global

vlan

vlan-id

]

Display information about dynamic

MLD snooping forwarding entries.

display mld-snooping

group

[

ipv6-group-address

ipv6-source-address

] * [

vlan

vlan-id

] [

verbose

] [

slot

slot-number

]

Display information about static MLD

snooping forwarding entries.

display mld-snooping

static

group

[

ipv6-group-address

ipv6-source-address

] * [

vlan

vlan-id

] [

verbose

] [

slot

slot-number

]

Display information about dynamic

router ports.

display mld-snooping

router-port

[

vlan

vlan-id

] [

slot

slot-number

]

Display information about static router

ports.

display mld-snooping

static-router-port

[

vlan

vlan-id

] [

slot

slot-number

]

Display statistics for the MLD

messages learned by MLD snooping.

display mld-snooping statistics

Display information about Layer 2

IPv6 multicast forwarding entries.

display ipv6 l2-multicast forwarding-table

[

group

ipv6-group-address

source

ipv6-source-address

] * [

vlan

vlan-id

]

[

slot

slot-number

]

Display information about IPv6 MAC

address multicast forwarding entries.

display ipv6 l2-multicast mac-forwarding-table

[

mac-address

] [

vlan

vlan-id

] [

slot

slot-number

]