HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Configuration Guide - Page 37
Verifying the configuration, Troubleshooting IGMP snooping
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
[SwitchC-vlan100] igmp-snooping enable [SwitchC-vlan100] quit # Configure Ten-GigabitEthernet 1/1/7 and Ten-GigabitEthernet 1/1/9 as static member ports for multicast group 224.1.1.1. [SwitchC] interface ten-gigabitethernet 1/1/7 [SwitchC-Ten-GigabitEthernet1/1/7] igmp-snooping static-group 224.1.1.1 vlan 100 [SwitchC-Ten-GigabitEthernet1/1/7] quit [SwitchC] interface ten-gigabitethernet 1/1/9 [SwitchC-Ten-GigabitEthernet1/1/9] igmp-snooping static-group 224.1.1.1 vlan 100 [SwitchC-Ten-GigabitEthernet1/1/9] quit Verifying the configuration # Display information about the static router ports in VLAN 100 on Switch A. [SwitchA] display igmp-snooping static-router-port vlan 100 VLAN 100: Router slots (0 in total): Router ports (1 in total): 1 XGE1/1/7 The output shows that Ten-GigabitEthernet 1/1/7 on Switch A has become a static router port. # Display information about the static IGMP snooping forwarding entries in VLAN 100 on Switch C. [SwitchC] display igmp-snooping static-group vlan 100 Total 1 entries. VLAN 100: Total 1 entries. (0.0.0.0, 224.1.1.1) Host slots (0 in total): Host ports (2 in total): XGE1/1/7 XGE1/1/9 The output shows that Ten-GigabitEthernet 1/1/7 and Ten-GigabitEthernet 1/1/9 on Switch C have become static member ports of the multicast group 224.1.1.1. Troubleshooting IGMP snooping Layer 2 multicast forwarding cannot function Symptom Layer 2 multicast forwarding cannot function on the switch. Analysis IGMP snooping is not enabled. Solution 1. Use the display igmp-snooping command to display IGMP snooping status. 30