HP 6930p HP EliteBook 6930p Notebook PC - Maintenance and Service Guide - Page 56
Display inverter, Remove the two Phillips PM2.5×6.0 screws - hinge replacement
UPC - 884962659670
View all HP 6930p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Display inverter Description Display inverter Spare part number 487431-001 Before removing the display inverter, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 44). Remove the display inverter: 1. Turn the computer right-side up, with the front toward you. 2. Open the computer as far as it will open. 3. Remove the two rubber screw covers (1) on the bottom edge of the display bezel. The rubber screw covers are available in the Display Rubber Kit, spare part number 482966-001. 4. Remove the two Phillips PM2.5×6.0 screws (2) that secure the bottom edge of the display bezel to the display enclosure. 5. Flex the hinge cover areas (1) and the bottom edge (2) of the display bezel until the bezel disengages from the display enclosure. 46 Chapter 4 Removal and replacement procedures