HP 6930p HP EliteBook 6930p Notebook PC - Maintenance and Service Guide - Page 62

Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD/CD-RW Combo Drive DVD-ROM Drive Spare part number 483190-001 483189-001 483191-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). Remove the optical drive: 1. Position the computer with the front toward you. 2. Loosen the Phillips PM2.5×9.0 captive screw (1) that secures the optical drive to the computer. 3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the left to release the optical drive from the computer. 4. Remove the optical drive (3) from the upgrade bay. 5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 52 Chapter 4 Removal and replacement procedures