HP 6930p HP EliteBook 6930p Notebook PC - Maintenance and Service Guide - Page 65

Expansion memory module Description 4096-MB memory module (PC2-6400, 800-MHz, DDR2) 2048-MB memory module (PC2-6400, 800-MHz, DDR2) 1024-MB memory module (PC2-6400, 800-MHz, DDR2) Spare part number 483195-001 483194-001 483193-001 Before removing the expansion memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory module compartment cover to the computer. 3. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory module compartment cover is included in the Plastics Kit, spare part number 487429-001. 4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 55