HP 6930p HP EliteBook 6930p Notebook PC - Maintenance and Service Guide - Page 97
Fingerprint reader board, Battery, on Hard drive, Keyboard, Switch cover, Display assembly
UPC - 884962659670
View all HP 6930p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Fingerprint reader board Description Fingerprint reader board (includes cable) Spare part number 486309-001 Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following: a. Hard drive (see Hard drive on page 50) b. Keyboard (see Keyboard on page 58) c. Switch cover (see Switch cover on page 67) d. Display assembly (see Display assembly on page 78) e. Top cover (see Top cover on page 83) f. Audio/ExpressCard assembly (see Audio/ExpressCard assembly on page 90) Remove the fingerprint reader board: 1. Remove the fingerprint reader board cable (1) from the opening in the top cover. 2. Remove the fingerprint reader board (2) by lifting it straight up. The fingerprint reader board is attached to the top cover using double-sided tape. Reverse this procedure to install the fingerprint reader board. Component replacement procedures 87