HP 6930p HP EliteBook 6930p Notebook PC - Maintenance and Service Guide - Page 82
Remove the Phillips PM2.5×4.0 screw, Release the heat sink
UPC - 884962659670
View all HP 6930p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
2. Remove the Phillips PM2.5×4.0 screw (2) that secures the heat sink to the system board. 3. Lift the right side of the heat sink (1) until it rests at angle. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 4. Release the heat sink (2) by sliding it to the right until it clears the left side of the top cover. 72 Chapter 4 Removal and replacement procedures
2.
Remove the Phillips PM2.5×4.0 screw
(2)
that secures the heat sink to the system board.
3.
Lift the right side of the heat sink
(1)
until it rests at angle.
NOTE:
Due to the adhesive quality of the thermal material located between the heat sink and
system board components, it may be necessary to move the heat sink from side to side to detach
it.
4.
Release the heat sink
(2)
by sliding it to the right until it clears the left side of the top cover.
72
Chapter 4
Removal and replacement procedures