HP CM3530 HP Color LaserJet CM3530 MFP Series - User Guide - Page 98
Link speed and duplex settings, Administration, Initial Setup, Networking and I/O, Embedded Jetdirect
UPC - 884420196501
View all HP CM3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Link speed and duplex settings The link speed and communication mode of the print server must match the network. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel. NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle. 1. At the product control panel, touch the down arrow until the Administration menu displays. 2. Touch the Administration menu to open it. 3. Touch the down arrow until the Initial Setup menu displays. 4. Touch the Initial Setup menu to open it. 5. Touch the Networking and I/O menu to open it. 6. Touch the Embedded Jetdirect menu to open it. 7. Touch the down arrow until the Link Speed option displays. 8. Touch the Link Speed option. 9. Touch one of the following options. Setting Auto 10T Half 10T Full 100TX Half 100TX Full 100TX Auto 1000TX Full Description The print server automatically configures itself for the highest link speed and communication mode allowed on the network. 10 megabytes per second (Mbps), half-duplex operation 10 Mbps, full-duplex operation 100 Mbps, half-duplex operation 100 Mbps, full-duplex operation Limits auto-negotiation to a maximum link speed of 100 Mbps 1000 Mbps, full-duplex operation 10. Touch the Save button. The product turns off and then on. 84 Chapter 5 Connectivity ENWW