HP CM3530 Service Manual - Page 124

Locate supplies Supplies are identified by their labeling and their blue plastic handles. The following figure illustrates the location of each supply item. Figure 4-2 Supply item locations 2 1 3 1 Toner collection unit 2 Print cartridges 3 Fuser Supply replacement guidelines To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the product. ● Allow sufficient space in the front and on the right side of the product for removing supplies. ● The product should be located on a flat, sturdy surface. For instructions on installing supplies, see the label on each supply item or see www.hp.com/go/ learnaboutsupplies. Change print cartridges When a print cartridge approaches the end of its estimated useful life, the control panel displays a message recommending that you order a replacement. The product can continue to print using the current print cartridge until the control panel displays a message instructing you to replace the cartridge, unless you have selected the option to override the message by using the Replace Supplies menu. For more information about the Replace Supplies menu, see Management menu on page 28. The product uses four colors and has a different print cartridge for each color: black (K), magenta (M), cyan (C), and yellow (Y). You can replace a print cartridge when the control panel displays a Replace Cartridge message. The control panel display also indicates the color of the cartridge that has reached the end 94 Chapter 4 Manage and maintain ENWW