HP CM3530 Service Manual - Page 486

Table 7-12 Control-panel messages (continued) Control panel message Description Recommended action Chosen personality not available. To continue touch OK. A print job requested a product language (personality) that is not available for this product. The job will not print and will be cleared from memory. Print the job by using a printer driver for a different printer language, or add the requested language to the product (if possible). To see a list of available personalities, print a configuration page. Cleaning The cleaning page is being processed. No action is necessary. Cleaning disk % complete Do not power off A storage device is being sanitized or cleaned. Do not turn off the product. The product's functions are unavailable. The product will automatically restart when finished. Clearing activity log The corresponding fax menu item has been No action is necessary. triggered. Clearing all blocked numbers The corresponding fax menu item has been No action is necessary. triggered. Clearing event log The event log is being cleared. No action is necessary. Clearing paper path The product jammed or was turned on and paper was detected where it should not be. It is attempting to eject these pages automatically. No action is necessary. Close front or right doors Either the front or right door is open. 1. Close the door. 2. Inspect the interlock on both the front and right doors. 3. Use the manual sensor test to verify that the interlock switches are working correctly. Close lower-right door The lower-right door is open. Close the lower-right door. Cooling device This product recently experienced a period of heavy usage. In order to maintain a supported operating temperature, the product cycles through intervals of printing and pausing. No action is necessary. Creating cleaning page A two-step page is being processed after having been created. This message is also used for products with duplexers that create and process the cleaning page in one step. No action is necessary. Data received The product is waiting for the command to No action is necessary. print the last page. The last page will print in a few moments. Deleting... The product is currently deleting a stored job. No action is necessary. Disk spinning up The EIO disk product in slot is spinning No action is necessary. up. Document feeder cover open The document feeder cover is open. Close the document feeder cover. Follow the instructions in the onscreen dialog box. DOCUMENT FEEDER EMPTY The document feeder is empty. 1. Place originals in the document feeder or on the glass. 2. Press the Start button. 456 Chapter 7 Solve problems ENWW