HP CM3530 Service Manual - Page 59

Table 2-9 Management menu (continued) Menu item Sub-menu item Supply Low/Order Threshold Color Supply Out Restrict Color Use Color printing access Color/Black Mix Color copying access Values Description Override at out 1 Override at out 2 Choose Override at out 1 to allow the product to continue printing when supply items, other than the toner collection unit, have reached the end of their estimated life. Using this option will eventually result in unacceptable print quality. Consider having a replacement cartridge available for when the print quality becomes unacceptable. Choose Override at out 2 to allow the product to continue printing when any color supply is past the end of its estimated capacity, including the toner collection unit. This option is not recommended because of the risk of overfilling the toner collection unit, which could result in the need to service the product. Information about the remaining toner is not available when printing in Override mode. Once an HP supply has reached the end of its estimated life, HP's Premium Protection Warranty on that supply has ended. For Warranty information, see Print cartridge limited warranty statement on page 571. The Override options can be enabled or disabled at any time, and they do not have to be re-enabled for each supply item. The product automatically continues printing when a supply item reaches the end of its estimated life. The message "Replace supply Override in use" displays on the control panel while a supply is used in Override mode. When the supply item is replaced with a new supply, Override is de-activated until another supply item reaches the end of its estimated life. Page Limit Range of 0 to 100000 This menu displays if you select Yes, Use Override for either override option. Select the number of pages the product continues to print while in override mode. The default is 1500. Select a value in the Use this menu to carry out administrative supply range. The default is 5%. management tasks such as changing the threshold when supplies should be ordered. Stop (default) Auto-continue black This menu sets the product behavior when a color supply has reached its estimated end of life. When Auto-continue black is selected, the product will continue printing using black toner only. Enable Color (default) Color If Allowed Disable Color This item allows the administrator to disable or restrict color printing. To use the Color If Allowed setting, set up user permissions and/or application permissions in the embedded Web server, HP Easy Printer Care software, or Web Jetadmin. Enable Color (default) Disable Color This item allows the administrator to disable or restrict color copying. Auto (default) Mostly color pages Mostly black pages This item controls how the engine switches from color mode to monochrome mode for maximum performance and print cartridge life. ENWW Management menu 29