HP Designjet Z6200 HP Designjet Z6200 Photo Printer series - User's Guide: Eng - Page 45
Unload a roll from the printer, Use the take-up reel - printhead
View all HP Designjet Z6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6. If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing. ● If you want to load the take-up reel now, select Load take-up reel now, read through the introductory text in the section Use the take-up reel on page 37, and then continue to step 3 of the procedure. ● If you want to load the take-up reel during printing, select Load it during printing, read through the introductory text in the section Use the take-up reel on page 37, and then continue to step 3 of the procedure. NOTE: Familiarize yourself with the procedural steps, because loading the take-up reel while printing requires you to complete the procedure while the printer is feeding and printing paper. Loading the take-up reel during printing saves approximately 1 m (3 ft) of paper. NOTE: During the initial printer setup, printhead alignment and color calibration are performed automatically after the roll is loaded into the printer. Unload a roll from the printer NOTE: If you used the take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer) during printing, unload the printed roll from the take-up reel before attempting to remove the roll from the printer. See Unload a roll from the take-up reel on page 43. 1. At the printer's front panel, select the icon, then Paper unload > Unload roll. 2. The paper is unloaded from the printer. 3. Release the spindle lock. 4. Remove the roll from the printer, pulling out the right end on the right side of the printer first. Do not insert your fingers into the spindle supports during the removal process. Handle the paper Use the take-up reel CAUTION: Make sure the printer is turned off when installing the take-up reel motor on the printer. ENWW Unload a roll from the printer 37