HP EX475 HP MediaSmart Server - Installation and Troubleshooting Guide - Page 10
Turn on the HP MediaSmart Server, Plug in., Connect., Power on. - 3 0 software
UPC - 883585222643
View all HP EX475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Turn on the HP MediaSmart Server 1 Plug in. Plug one end of the power cord into the server's power receptacle and the other end into an electrical outlet. 2 Connect. Connect one end of the Ethernet cable to the server and the other end to an available Ethernet port on your router or switch. 3 Power on. Press the Power button on the back of the server. The server takes approximately 60 seconds to start. The indicator lights blink and change color throughout the startup process. Wait for all of the server lights to be solid before proceeding with the software installation. IMPORTANT: Do not attach USB devices to the HP MediaSmart Server during initial setup. For additional information, see the Installation and Troubleshooting Guide. 8 Chapter 2