HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 119
Switch RADIUS Configuration, User Access Configuration controls - set switch name
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
The following table describes User Access Configuration controls: Table 93 User Access Configuration controls Control Description User ID (1-10) Set Class of Service Set user name (0-8 chars) Set user password (0-128 chars) Re-type user password (0-128 chars) User Status Sets a numeric identifier for the user. Sets the Class-of-Service to define the user's authority level. Defines the user name of maximum eight characters. Sets the user password of up to 128 characters maximum. Confirms the user password. Enables or disables the user. Switch RADIUS Configuration To display the following form, select System > Radius. The following table describes Switch Radius Configuration controls: Table 94 Switch RADIUS Configuration controls Control Description Primary Radius IP Address Secondary Radius IP Address Radius port (1500-3000) Radius timeout (1-10) Radius retries (1-3) Enable/Disable Radius Server Configures the primary Radius server address. Configures the secondary Radius server address. Configures the number of the UDP port to be configured, between 1500 3000. The default is 1645. Configures the amount of time, in seconds, before a Radius server authentication attempt is considered to have failed. The default is 3 seconds. Configures the number of failed authentication requests before switching to a different Radius server. The default is 3 requests. Enables or disables the Radius server. Configuring the switch 119