HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 52

RIP Interfaces Dashboard NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. To display the following form, select Layer 3 > RIP > RIP Interfaces (click the underlined text, not the folder). The following table describes the RIP Interfaces Dashboard controls: Table 39 RIP Interfaces Dashboard controls Control Description Search Range Search Options Interface ID RIP State RIP Version Default Action Supply Updates Listen to Updates Poisoned Reverse Triggered Updates Multicast Updates Metric Auth Type To search for a RIP interface, enter a range of interface ID numbers in the From and To fields. To focus the search for a RIP interface, enter optional search parameters: • RIP version • RIP state Fields that have a value of "any" are ignored during the search. Choose a search operation: • or: Search for RIP interfaces specified in the search range that meet any of the criteria entered. • and: Search for RIP interfaces specified in the search range that meet all of the criteria entered. Click Search to display RIP interface that fit the range and meet the criteria entered. Displays each interface number. Displays the current status of RIP in the interface: enabled or disabled. Displays the RIP version used by the interface. Displays the default action for RIP on the interface. Displays the current status of Supply: enabled or disabled. Displays whether Supply Updates is enabled or disabled. Displays whether Poisoned Reverse is enabled or disabled. Displays whether Triggered Updates is enabled or disabled. Displays whether Multicast Updates is enabled or disabled. Displays the route metric for the interface. Displays the authentication type for the interface. Dashboard 52